#!/bin/sh
# Copyright 1999-2021 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2

# Based on the ac-wrapper.pl script provided by MandrakeSoft
# Rewritten in bash by Gregorio Guidi
#
# Executes the correct autoconf version.
#
# - defaults to newest version available (hopefully autoconf-2.60)
# - runs autoconf 2.13 if:
#   - envvar WANT_AUTOCONF is set to `2.1'
#     -or-
#   - `ac{local,include}.m4' or `configure.{in,ac}' have AC_PREREQ(2.1) (not higher)
#     -or-
#   - `configure' is already present and was generated by autoconf 2.13

warn() { printf "ac-wrapper: $*\n" 1>&2; }
err() { warn "$@"; exit 1; }
unset IFS
which() {
	local p
	IFS=: # we don't use IFS anywhere, so don't bother saving/restoring
	for p in ${PATH} ; do
		p="${p}/$1"
		[ -e "${p}" ] && echo "${p}" && return 0
	done
	unset IFS
	return 1
}

#
# Sanitize argv[0] since it isn't always a full path #385201
#
argv0=${0##*/}
case ${0} in
	${argv0})
		# find it in PATH
		if ! full_argv0=$(which "${argv0}") ; then
			err "could not locate ${argv0}; file a bug"
		fi
		;;
	*)
		# re-use full/relative paths
		full_argv0=$0
		;;
esac

if [ "${argv0}" = "ac-wrapper.sh" ] ; then
	err "Don't call this script directly"
fi

if [ "${WANT_AUTOCONF}" = "2.1" ] && [ "${argv0}" = "autom4te" ] ; then
	err "Autoconf 2.13 doesn't contain autom4te.\n" \
	    "   Either unset WANT_AUTOCONF or don't execute anything\n" \
	    "   that would use autom4te."
fi

if ! seq 0 0 2>/dev/null 1>&2 ; then #338518
	seq() {
		local f l i
		case $# in
			1) f=1 i=1 l=$1;;
			2) f=$1 i=1 l=$2;;
			3) f=$1 i=$2 l=$3;;
		esac
		while :; do
			[ $l -lt $f -a $i -gt 0 ] && break
			[ $f -lt $l -a $i -lt 0 ] && break
			echo $f
			: $(( f += i ))
		done
		return 0
	}
fi

#
# Set up bindings between actual version and WANT_AUTOCONF;
# Start at last known unstable/stable versions to speed up lookup process.
#
if [ -z "${KNOWN_AUTOCONF}" ] ; then
	KNOWN_AUTOCONF="2.71:2.5 2.70:2.5 2.69:2.5"
fi
vers="${KNOWN_AUTOCONF} 9999:2.5 $(printf '2.%s:2.5 ' `seq 99 -1 59`) 2.13:2.1"

binary=""
for v in ${vers} ; do
	auto_ver=${v%:*}
	if [ -z "${binary}" ] && [ -x "${full_argv0}-${auto_ver}" ] ; then
		binary="${full_argv0}-${auto_ver}"
		break
	fi
done
if [ -z "${binary}" ] ; then
	err "Unable to locate any usuable version of autoconf.\n" \
	    "\tI tried these versions: ${vers}\n" \
	    "\tWith a base name of '${full_argv0}'."
fi

#
# Check the WANT_AUTOCONF setting.  We accept a whitespace delimited
# list of autoconf versions.
#
if [ -n "${WANT_AUTOCONF}" ] ; then
	for v in ${vers} x ; do
		if [ "${v}" = "x" ] ; then
			warn "warning: invalid WANT_AUTOCONF '${WANT_AUTOCONF}'; ignoring."
			unset WANT_AUTOCONF
			break
		fi

		auto_ver=${v%:*}
		want_ver=${v#*:}
		for wx in ${WANT_AUTOCONF} ; do
			if [ -x "${full_argv0}-${wx}" ] ; then
				binary="${full_argv0}-${wx}"
				v="x"
			elif [ "${wx}" = "${want_ver}" ] && [ -x "${full_argv0}-${auto_ver}" ] ; then
				binary="${full_argv0}-${auto_ver}"
				v="x"
			fi
		done
		[ "${v}" = "x" ] && break
	done
fi

#
# autodetect helpers
#
acprereq_version() {
	sed -n -r \
		-e '/^\s*(#|dnl)/d' \
		-e '/AC_PREREQ/s:.*AC_PREREQ\s*\(\[?\s*([0-9.]+)\s*\]?\):\1:p' \
		"$@" |
	LC_ALL=C sort -n -t . |
	tail -1
}

generated_version() {
	local re='^# Generated (by (GNU )?Autoconf|automatically using autoconf version) ([0-9.]+).*'
	sed -n -r "/${re}/{s:${re}:\3:;p;q}" "$@"
}

#
# autodetect routine
#
if [ "${WANT_AUTOCONF}" = "2.1" ] && [ -f "configure.ac" ] ; then
	err "Since configure.ac is present, aclocal always use\n" \
	    "\tautoconf 2.59+, which conflicts with your choice and\n" \
	    "\tcauses error. You have two options:\n" \
	    "\t1. Try execute command again after removing configure.ac\n" \
	    "\t2. Don't set WANT_AUTOCONF"
fi

if [ "${WANT_AUTOCONF:-2.1}" = "2.1" ] && [ -n "${WANT_AUTOMAKE}" ] ; then
	# Automake-1.7 and better require autoconf-2.5x so if WANT_AUTOMAKE
	# is set to an older version, let's do some sanity checks.
	case "${WANT_AUTOMAKE}" in
	1.[456])
		acfiles=$(ls aclocal.m4 acinclude.m4 configure.in configure.ac 2>/dev/null)
		[ -n "${acfiles}" ] && confversion=$(acprereq_version ${acfiles})

		[ -z "${confversion}" ] && [ -r "configure" ] \
			&& confversion=$(generated_version configure)

		if [ "${confversion}" = "2.1" ] && [ ! -f "configure.ac" ] ; then
			binary="${full_argv0}-2.13"
		fi
	esac
fi

if [ -n "${WANT_ACWRAPPER_DEBUG}" ] ; then
	if [ -n "${WANT_AUTOCONF}" ] ; then
		warn "DEBUG: WANT_AUTOCONF is set to ${WANT_AUTOCONF}"
	fi
	warn "DEBUG: will execute <${binary}>"
fi

#
# for further consistency
#
if [ -z "${WANT_AUTOCONF}" ] ; then
	for v in ${vers} ; do
		auto_ver=${v%:*}
		want_ver=${v#*:}
		if [ "${binary}" = "${full_argv0}-${auto_ver}" ] ; then
			export WANT_AUTOCONF="${want_ver}"
			break
		fi
	done
fi

#
# Now try to run the binary
#
if [ ! -x "${binary}" ] ; then
	# this shouldn't happen
	err "${binary} is missing or not executable.\n" \
	    "\tPlease try emerging the correct version of autoconf."
fi

exec "${binary}" "$@"
# The shell will error out if `exec` failed.